We have an ASA document, “Safety Guidelines for Shotcrete,” that addresses shotcrete safety. It is not a job specific safety plan but gives you guidance on the information you may include in your plans. You can find it on our bookstore at https://shotcrete.org/bookstore/?productpage=2. A free copy of the Safety Guidelines is provided to all of our corporate and sustaining members. Membership also provides many other benefits, including discounts on shotcrete nozzleman certification and participation in our committees. We have a committee specifically devoted to Education and Safety for shotcrete that is very active.
Regarding the repair of the rubber hose, there is no procedure to repair any breaches in the hose itself. A damaged or excessively worn hose should never be used as the pressure that builds when a delivery line plugs during pumping is extremely dangerous. Modern pumps can reach 2000 psi (14 MPa) internal concrete pressure when experiencing a plug and the hose must be capable of carrying that high pressure. The wet-mix shotcrete hose is heavily reinforced, and the couplings are designed for high pressure. Your crew must be sure that all clamps are fully engaged on the heavy-duty couplings, and that safety pins are in place.
Shotcrete is a placement method for concrete. Thus, generating the maturity curves would be based on the concrete mixtures. There are several online resources about the maturity method. One that discusses production of the curves is from the Minnesota DOT and available in PDF format at www.dot.state.mn.us/materials/concretedocs/MaturityMethodProcedure.pdf.
The zoological and aquarium industry has been successfully using shotcrete placement within animal habitats for several decades. The flexibility and durability of shotcrete provides natural settings that allow for better animal enrichment over caged habitats. Zoo guests also benefit from viewing animals in a more organic habitat where the animals exhibit their natural behaviors
Wet-mix shotcrete has been used more and more for structural applications in the past few decades. Recently, wetmix shotcrete was successfully used to construct a mass structural wall with congested reinforcement and minimum dimensions of 1. 0 m in a sewage treatment plant.
Construction has a back problem. After the common cold, back pain is the most common reason why construction workers miss work. Worse, lower back injury is the single leading cause of long-term workplace disability. The back pain crisis plagues the construction industry. Why? It is the physical heavy work that is typical to active construction work.
If asked, could you accurately explain why the choice of slump is so important to a wet-mix shotcrete material’s hardened properties?
located in El Paso, TX, the El Paso Zoo sits on 35 acres (1400 m2 ) of land and houses over 220 animal species from around the world. Accredited by the Association of Zoos & Aquariums (AZA), the El Paso Zoo’s mission is to celebrate the value of animals and natural resources and create opportunities for people to rediscover their connection to nature. Locally recognized as the “Best Place to Take Your Kiddos,” the El Paso Zoo features family favorite attractions like African Star Train, Foster Tree House Playground, and now home to the award winning Chihuahuan Desert exhibit.
Shotcrete is just a placement method for concrete. Shotcrete placement with proper materials and application techniques should provide monolithic concrete with a 28-day compressive strength of at least 4000 lb/in2 (28 MPa). Thus, any systems that work in concrete should be fine. Either mechanically-fixed or epoxy-set anchors are commonly used in concrete. You should consult with the anchor suppliers for the size and type of anchor appropriate for your specific application.
In normal weather conditions test panels should be undisturbed for at least 24 hours. In cold weather you must protect the panels from freezing and preferably keep the concrete surface temperature above 50 to 55 °F. That allowsthe young concrete to gain enough strength to tolerate movement. Also, your test panels are very small in comparison to current ACI 506.2 Specification for Shotcrete requirements that have a minimum of 16 by 16 by 51⁄2 in. (400 by 400 by 140 mm) dimensions. When coring your smaller panels you should be sure to have the nearest edge of the core 3 in. (75 mm) from the sides to preclude the effect that rebound collection in the corners may cause.
